Denon AVR-990 User Manual


Getting Started Connections Playback Remote ControlZONE2 Information Troubleshooting Specifications
ENGLISH
Making the Input Settings (Input Setup)
Setting items Setting contents
iPod dock
Assign the control dock for
iPod input.
The control dock for iPod can be assigned to the
CD DVD HDP
TV SAT/CBL VCR DVR V.AUX
input sources.
Assign : Assign the control dock for iPod to the selected input source.
None : Do not assign the control dock for iPod to the selected input
source.
By default on first use, it is assigned to “VCR (iPod)”.
An input source to which control dock for iPod cannot be assigned is
displayed as “– – –”.
If control dock for iPod is not connected to the AVR-990, assignment
of the “iPod dock” is disabled, and you can use it as a standard input
source.
•
•
•
Default
Reset all settings to factory
default.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
If you select “Default” and press ENTER the message “Default
Setting?” is displayed. Select “Yes” or “No”, and then press ENTER.
Setting items Setting contents
Digital
(Continued)
Upon purchase, the settings of the different input sources are as shown
below.
Input
source
CD DVD HDP TV SAT/CBL VCR
Default
setting
Coax 3 Coax 1 None Opt 1 Coax 2 None
Input
source
DVR V.AUX SIRIUS
Default
setting
Opt 2 Opt 3 None
When control dock for iPod is used as the input source, assignment of
the digital input terminal is disabled, even if it is assigned.
b
Component
Set this to change the
component video input
terminals assigned to the
input sources.
The
DVD HDP TV SAT/CBL VCR DVR V.AUX
input sources
are assigned to the component video input terminals as shown below.
1-RCA (Component video 1) / 2-RCA (Component video 2) / 3-RCA
(Component video 3)
None : Do not assign a component video input terminal to the selected
input source.
Upon purchase, the settings of the different input sources are as shown
below.
Input
source
DVD HDP TV
SAT/
CBL
VCR DVR V.AUX
Default
setting
1-RCA 2-RCA None None None 3-RCA None
An input source to which a component video input terminal cannot be
assigned is displayed as “– – –”.
When control dock for iPod is used as the input source, assignment of
the component video input terminal is disabled, even if it is assigned.
b
•
•
Remote control operation
buttons
:Displaying the menu
Cancel the menu
:Moves the cursor
(Up/Down/Left/Right)
:Confirm the setting :Return to previous menu
Settings

Denon AVR-990 Specifications

General

Brand	Denon
Model	AVR-990
Category	Stereo Receiver
Language	English