2. Updating via USB
The latest î™°rmware can be downloaded to a USB memory for updates.
2.1. Connecting to the USB Memory
(1) Preparation
• Use a memory that supports USB2.0.
• USB format : Prepare a USB memory formatted in FAT16 or FAT32.
• Do not run the USB memory through a hub.
• Do not connect a computer to the USB port of this unit using a USB cable.
• Do not use an extension cable when connecting the USB unit.
• If a USB memory device cannot be updated, replace it with a different USB memory device and per-
form the update again.
2.2. Unzipping the Downloaded File
Unzip the downloaded î™°le on your computer.
AVR-XXXXXXX USB_AVR-XXXXXXX_XXXXXXXXXXXX-XXXX.zip
The "
îšżrmware
" folder is created upon unzipping the î™°le.
Copy that folder to USB î™±ash drive.
The "
îšżrmware
" folder must be in the root directly of the USB î™±ash drive (memory).
copy to USB flash drive
132
Caution in
servicing
Electrical Mechanical Repair Information Updating
To Next Page
Loading...
