FIRMWARE UPDATE PROCEDURE
1. Items necessary for update
Items necessary for update are as follows.
Update Type Needed Part for Update Requirement
Offered / not Offered
Standard Service Equipment
Not offered by D&M
Purchase from D&M Article code Download from SDI
Via USB USB Stick (USB 2.0 : Min 1GB) Formatting FAT 32 X - 2.3. File structure on USB Memory
Via DPMS
Internet Connection by Broadband Circuit X -
Modem X -
Router X -
Ethernet cable
(CAT-5 or greater is recommended)
X -
131
Caution in
servicing
Electrical Mechanical Repair Information Updating
To Next Page
Loading...
