Source Rename
Change the display name for input source.
This is convenient when the name of your device and the input source
name of this unit are different. You can change the name to suit your
needs. When the renaming is completed, the name is displayed on this
unit’s display and on the menu screen.
CBL/SAT / DVD/Blu-ray /
Blu-ray / Game / AUX /
Media Player / TV Audio:
Change the display name for input source.
Set Defaults:
The Source Rename settings are returned
to the default settings.
0
Up to 12 characters can be input. For character input, see “Using the keyboard
screen” (v
p. 143).
Hide Sources
Remove from the display input sources that are not used.
Show
(Default) :
Use this source.
Hide: Do not use this source.
0
The “Bluetooth” function can be disabled by setting Bluetooth to “Hide”.
Source Level
This function corrects the playback level of the selected input source’s
audio input.
Make this setting if there are differences in the input volume levels
between the different sources.
-12 dB – +12 dB (Default : 0 dB)
0
“Source Level” settings are stored for each input source.
Contents Connections Playback Settings Tips Appendix
165
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
