Listening to music on an iPod
1
Connect the iPod to the USB port. (v p. 53)
2
Press iPod/USB to switch the input source to “iPod/
USB”.
“Browse from iPod” is displayed on the display of this unit.
0
Nothing is displayed on the TV screen.
3
Operate iPod itself while seeing the iPod screen to play
back music.
0
“iPod Browse Mode” has two modes, “From iPod” and “On-Screen”. The default
setting is “From iPod” that operate the iPod itself while looking at the iPod screen.
0
To change to “On-Screen”, where you perform operations while having the iPod
information displayed on the TV screen, see “iPod Browse Mode settings”
(v p. 65).
NOTE
0
Depending on the type of iPod and the software version, some functions may not
operate.
0
Note that Denon will accept no responsibility whatsoever for any problems arising
with the data on an iPod when using this unit in conjunction with the iPod.
o
Operations accessible through the option
menu
This can be operated when the “iPod Browse Mode” is set to “From
iPod”. (v p. 65)
0
“iPod Browse Mode settings” (v p. 65)
0
“Adjusting the volume of each channel to match the input source (Ch
Level Adjust)” (v p. 112)
0
“Adjusting the tone (Tone)” (v p. 113)
0
“Displaying your desired video during audio playback (Video
Select)” (v
p. 114)
0
“Playing the same music in all zones (All Zone Stereo)” (v p. 115)
Contents Connections Playback Settings Tips Appendix
64
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
