o
USB memory devices cannot be played back
Symptom Cause / Solution Page
“No connection” is
displayed.
0
This unit cannot recognize the USB memory device. Disconnect and reconnect the USB memory device. 53
0
Mass storage class compatible USB memory devices are supported. －
0
This unit does not support a connection through a USB hub. Connect the USB memory device directly to
the USB port.
－
0
The USB memory device must be formatted to FAT16 or FAT32. －
0
Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.
When using a type of portable hard disc drive compatible with the USB connection that requires power
from an AC adapter, use the AC adapter that came with the drive.
－
Files on the USB memory
device are not displayed.
0
Files of a type not supported by this unit are not displayed. 68
0
This unit is able to display files in a maximum of eight folder layers. A maximum of 5000 files (folders) can
also be displayed for each layer. Modify the folder structure of the USB memory device.
－
0
When multiple partitions exist on the USB memory device, only files on the first partition are displayed. －
Files on a USB memory
device cannot be played.
0
Files are created in a format that is not supported by this unit. Check the formats supported by this unit. 229
0
You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be
played on this unit.
－
0
Playback may not be possible if the album art file size exceeds 2 MB. －
Contents Connections Playback Settings Tips Appendix
219
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
