EasyManuals Logo

Denon AVR-X1700H User Manual

Denon AVR-X1700H
300 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #201 background imageLoading...
Page #201 background image
o
Surround Back
Set the presence, size and number of surround back speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the surround back speakers
are not connected.
2 spkrs
(Default):
Use two surround back speakers.
1 spkr:
Use only one surround back speaker.
Connect to the L terminal to SURROUND
BACK when this setting is selected.
0
When “Assign Mode” setting is “Surround Back”, you can make this setting.
(v p. 198)
o
Front Height
Set the presence and size of the front height speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the front height speakers are
not connected.
0
When “Assign Mode” setting is “Front Height”, you can make this setting.
(v p. 198)
Contents Connections Playback Settings Tips Appendix
201
Front panel Display Rear panel Remote Index

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X1700H and is the answer not in the manual?

Denon AVR-X1700H Specifications

General IconGeneral
Supported radio bandsAM, DAB, DAB+, FM
Radio Data System (RDS)Yes
Internet radio services supportedAmazon Music, Deezer, Pandora, SIRIUS Internet Radio, Spotify, Tidal, TuneIn
Receiver typeSurround
Pre-out channels0.2
Input sensitivity200 mV
Audio output channels7.2 channels
Signal-to-Noise Ratio (SNR)98 dB
Total Harmonic Distortion (THD)10 %
Power output per channel (1KHz@6 Ohm)175 W
Power output per channel (20-20KHz@8 Ohm)80 W
HDMI in6
Remote (IR) input1
Composite video in2
Digital audio coaxial in-
HDCP version2.3
Product colorBlack
Audio decodersDTS:X, Dolby Atmos, DTS Virtual:X, Dolby Surround, Dolby TrueHD
Center speaker impedance16 Ω
Speakers connectivity typeClamp terminals
Audio formats supportedAAC, ALAC, DSD, FLAC, MP3, WAV
Supported graphics resolutions7680 x 4320
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)430 W
Package weight10600 g
Package depth435 mm
Package width523 mm
Package height232 mm
Weight and Dimensions IconWeight and Dimensions
Depth339 mm
Width434 mm
Height151 mm
Weight8500 g

Related product manuals