Name: Denon AVR-X2200W
Brand: Denon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Manual

Enter the name (SSID) and password of the network you wish to

connect to.

1. Set the following items.

SSID:

Input the name of the wireless network

(SSID).

Security:

Select the encryption method according

to the encryption setting of the access

point you are using.

Password: Input the password.

Default Key:

Select the Default Key.

When connecting to a “WEP” encrypted

network, “Default Key” menu is

displayed.

2. Select “Connect” at the end of the setting.

The wireless LAN (Wi-Fi) settings of this unit can also be configured from a PC or

tablet that supports wireless LAN connection.

When using a device that has a firmware version of iOS 7 or later, “When

connecting using Wi-Fi” (v p. 198) in “Use iOS Device”.

1. Press and hold the DIMMER and STATUS buttons on the main unit for at least 3

seconds when the power of the unit is on.

2. Connect the wireless LAN of the PC or tablet used to “Denon AVR-X2200W”

when the message “Connect your Wi-Fi device to Wi-Fi network called “Denon

AVR-X2200W”” appears in the display.

3. Start up the browser and enter “192.168.1.16” in the URL.

4. Use the browser to enter the settings, select “Connect” and then exit the

settings.

Contents Connections Playback Settings Tips Appendix

199

Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X2200W

Questions and Answers:

Need help?

Do you have a question about the Denon AVR-X2200W and is the answer not in the manual?

General