Name: Denon AVR-X2200W
Brand: Denon
Rating: 4 (1 reviews)

To Next Page

To Previous Page

No sound comes out

Symptom Cause / Solution Page

No sound comes out of

speakers.

Check the connections for all devices. 26

Insert connection cables all the way in. －

Check that input connectors and output connectors are not reversely connected. －

Check cables for damage. －

Check that speaker cables are properly connected. Check that cable core wires come in contact with the

metal part on speaker terminals.

Securely tighten the speaker terminals. Check speaker terminals for looseness. 33

Check that a proper input source is selected. 63

Adjust the volume. 64

Cancel the mute mode. 64

Check the digital audio input connector setting. 170

Check the digital audio output setting on the connected device. On some devices, the digital audio output

is set to off by default.

－

When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the

speaker terminal and PRE OUT connector.

－

No sound comes out when

using the DVI-D

connection.

When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a

separate audio connection.

－

Contents Connections Playback Settings Tips Appendix

223

Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X2200W

Questions and Answers:

Need help?

Do you have a question about the Denon AVR-X2200W and is the answer not in the manual?

General