Denon AVR-X6500H User Manual

Changing the settings
1
Set the items below to the settings you want to
register.
The following settings from A to I can be memorized for MAIN
ZONE, and settings A and B can be memorized for ZONE2 and
ZONE3.
A
Input source (v p. 93)
B
Volume (v p. 94)
C
Sound mode (v
p. 140)
D
Audyssey (Audyssey MultEQ
®
XT32, Audyssey Dynamic EQ
®
,
Audyssey Dynamic Volume
®
, Audyssey LFC™) (v
p. 186)
E
“ Restorer ” (v p. 183)
F
“Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 135)
G
“Displaying your desired video during audio playback (Video
Select)” (v p. 137)
H
“Adjusting the picture quality for your viewing environment
(Picture Mode)” (v
p. 138)
I
“ HDMI Video Output ” (v p. 198)
0
Press and hold QUICK SELECT while a radio station is being received is
being played back with any of the following sources, the current radio
station is memorized.
0
Tuner / Internet Radio Station
2
Press MAIN, Z2 or Z3 to select the operating zone with
the remote control.
The button for the selected zone is lit.
3
Press and hold the desired QUICK SELECT until
“Quickz Memory”, “Z2 Quickz Memory” or “Z3 Quickz
Memory” appears on the display.
The current settings will be memorized.
z is displayed the number for the QUICK SELECT button you
pressed.
o
Changing the Quick Select Name
The MAIN ZONE Quick Select name displayed on the TV screen or
display of this unit can be changed to a different name.
For the name change method, see “Quick Select Names”.
(v p. 254)
Contents
Connections Playback Settings Tips Appendix
159
Front panel Display Rear panel Remote Index

Denon AVR-X6500H Specifications

General

Brand	Denon
Model	AVR-X6500H
Category	Receiver
Language	English