Power does not turn on / Power is turned off
Power is not turned on.
0
Check whether the power plug is correctly inserted into the power outlet. (v
p. 30)
0
This unit is in standby mode. Press the X button on the unit or the POWER X button on the remote control. (v p. 32)
Power automatically turns off.
0
The sleep timer is set. Turn on the power again. (v p. 75)
0
“Auto-Standby” is set. “Auto-Standby” is triggered when there is no operation for a set amount of time. To disable “Auto-Standby”, set “Auto-Standby”
on the menu to “Off”. (v p. 91)
LED is flashing
Flashing red.
0
This unit’s amplifier circuit has failed. Disconnect the power and contact the repair center.
Flashing orange.
0
The clock is incorrect because the AC was temporarily switched off, etc. Check the network connection and adjust the clock. (v
p. 88)
Contents
Connections Playback Settings Tips Appendix
108
Front/Top
panel
Rear panel
Remote control
unit
Index
To Next Page
Loading...
