IR Control
Assign operations on this unit to the remote control of your TV. This
enables you to operate this unit with the remote control of your TV.
1
Use ui, select the operation on this unit to be
performed with the remote control of your TV and
press ENTER.
Volume Up / Volume Down / Mute / Power Toggle / Power On /
Power Off / Input Optical In 1 / Input Optical In 2 / Input
Analog In
0
The operations indicated by a check mark are already assigned to the TV
remote control. To assign an operation to a different button, press ENTER
while the operation is indicated by a check mark to remove the check mark,
then configure the setting again.
2
Follow the instructions in the display to configure the
setting.
The set operation on this unit is indicated by a check mark after the
setting is complete.
CD Auto Play
When the disc tray is closed, the unit can detect the CD, automatically
switch the input source to “CD” and start playback.
On
(Default):
Performs automatic playback.
Off: Does not perform automatic playback.
Language
Sets the language for display the menu.
English / Français / Español (Default : English)
Contents Connections Playback Settings Tips Appendix
90
Front/Top
panel
Rear panel
Remote control
unit
Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
