@ Auto Space Button (AUTO SPACE)
• Pressing this button will cause the -1 A_U_T_o-'-s-P_A_C_E_I indicator to
light and a blank space of approximately 4 seconds is inserted
between tracks during CO playback. Pressing the button once
more, the I AUTO SPACE I indicator goes out and the Auto
Space feature is cancelled.
• When one of the track search buttons ( I~ or ~• ) is pressed,
the Auto Space function will not operate.
• The Auto Space function will work during normal playback as
well as programmed playback.
• Although 4-second blanks are inserted between tracks, this
additional time is not reflected by the indication on the time
remaining display or time display when the Auto Edit function is
engaged.
~
Repeat All Tracks Button (ALL)
• Press this button to repeat playback of all tracks.
• When this button is pressed, I ALL! lights on the display and all
tracks on the disc or in a program will be repeatedly played
back. Press this button once more to disengage the Repeat All
function.
0 1-track Repeat Button (1)
• Press this button to repeat one track only.
When pressed during playback, the track currently playing is
repeated.
4D) A-B Repeat Button (A - Bl
• Press this button for repeat playback between a designated
starting point (A) and an ending point (B). (Refer to page 8 for
details.)
4D Random Play Button (RANDOM)
• Press this button to play the tracks on the disc in random order.
4P) Time Mode Button (TIME)
• This button is used to select the desired indication on the TIME
display. The indication on this display will change each time the
button is pressed.
Normally, the elapsed playback time of the current track is
displayed.
Pressing the button once, I SINGLE I is displayed and the
remaining time of the current track is displayed.
Pressing once more, I TOTAL I is displayed, and total playing
time of remaining tracks is displayed. However, when program-
med play is in progress, the total remaining time of the program
is displayed.
Press the button once again to return to the normal display of
the elapsed playback time of the current track.
41) Index Button (INDEX)
• Press this button to start playback from an index within a track.
Use the number buttons to specify the index number.
4I> Program/ Direct Button (PROG / DIRECT)
• Press this button when you want to enter tracks for program-
med playback. (Refer to page 7 for details.)
41) Number Buttons (1, 2, 3, 4, 5, 6, 7, 8, 9 and 10)
• Use these buttons for the direct search and program memory
functions.
For direct search, press for example button [J] if you want to
hear track number 3. For track number 12, press[±]]] then [2].
To program tracks, press the PROG/OIRECT button to set to the
program mode.
4(9 +10 Button (+10)
• Press this button first when selecting track numbers over 10.
Use it together with the number buttons. For example, to select
track number 41), press [±]]] then [fil .
For track number 33, press[±]]] three times, then press [J].
QI Play Button (
►
PLA YI
• Press this button to start playback of a disc.
• When this button is pressed,
I►
PLAYi is displayed, and the
track number being played is displayed together with the
elapsed playback time of the track.
• Tracks are shown on the calendar display. Once a track has been
played, the corresponding track number goes out on the
calendar display.
41) Pause Button ( II PAUSE)
• Press this button to stop playback temporarily.
• If this button is pressed during playback, playback is stopped
temporarily, the
I
►
PLAYi indicator goes out and the! II PAUSE I
indicator lights.
• Press this button or the play button (
►
PLAY) again to continue
playback.
41) Automatic Search Reverse Button ( I~ I
• Press this button to return the pickup to the beginning of the
present track. Press again to return to other tracks.
• By pressing the button a number of times, the pickup will move
back the corresponding number of tracks.
~
Automatic Search Forward Button (
►►
1
I
• Press this button to move the pickup forward to the beginning of
the next track. Press again to move ahead to other tracks.
• By pressing the button a number of times, the pickup will
advance the corresponding number of tracks.
G, Stop Button (
■
STOP)
• Press this button to stop playback.
The disc will stop rotating, and the number of tracks and total
playing time of the disc are displayed on the TRACK NO. and
TIME displays, respectively.
• In case programmed playback is engaged when this button is
pressed, the number of tracks and total playing time of the
program are displayed.
• If this button is pressed in the stop mode, the program memory •
is cleared.
@) Manual Search Reverse Button (
~
)
• Press this button •during playback for fast reverse search. As
long as the button is kept pressed, music signals are played back
faster than normal.
• Pressing this button when the pause mode is engaged, you can
quickly reverse the pickup to a desired position, three times
faster compared to manual reverse search during playback.
During this time, no sound is heard.
@) Manual Search Forward Button (
►►
I
• Press this button during playback for fast forward search. As
long as the button is kept pressed, music signals are played back
faster than normal.
• Pressing this button when the pause mode is engaged, you can
quickly forward the pickup to a desired position, three times
faster compared to manual forward search during playback.
During this time, no sound is heard.
~
Call Button (CALL)
• Press this button to check the tracks which have been prog-
rammed.
@) Headphones Jack (PHONES)
• For private listening, you can connect your headphones to this
jack. Do not raise the volume level too much when listening
through headphones. (Headphones are sold separately.)
~
Volume Control (PHONES LEVEL)
• Use this control to adjust the output level (volume) of the
headphones.
fl, Output Terminal (FIX-VARIABLE)
• Connect these jacks to the input jacks on your amplifier. (Refer
to page 6 for details on the connections.)
W Digital Output Jack (COAXIAL)
• This jack outputs digital data.
• We recommend using a 75-ohm pin cord (available in stores) for
connections.
Continuous Operation
If the automatic search reverse button 41), the automatic search
forward button W, the CALL button~- or the +10 button 41!) are held
in, the function of that button will be repeated.
5
To Next Page
Loading...
