10
ENGLISH
Play back disc
1 2 4 53
5
1
Press BD to switch an input source
for a player used for playback.
2
Play the component connected to
this unit.
Make the necessary settings on the
player (language setting, subtitles
setting, etc.) beforehand.
3
Adjust the sound volume.
VOL d ··········································· Volume up
VOL f ······································ Volume down
MUTE ·················································· Muting
4
Set the listening mode.
Set the listening mode according to the
playback contents (cinema, music, etc.)
or according to your liking (vpage21
“Selecting a listening mode (Surround
mode)”).
When power is switched to standby
Press POWER OFF.
GPower indicator status in standby modeH
• Normal standby : Off
You can also switch the power to standby by
pressing ON/STANDBY on the main unit.
NOTE
During power standby, a minimal amount of power is consumed. To
totally cut off the power, remove the power cord from the power
outlet.
1.AVR391E3ENG4th100602.inddSec:101.AVR391E3ENG4th100602.inddSec:10 2010/06/0414:29:202010/06/0414:29:20
To Next Page
Loading...
Need help?
General
