Switching the standby linking via HDMI
control function on or off
In the default settings, the HDMI control automatically puts the unit into
standby mode, linked to the TV's power standby operation. When the
standby linking via HDMI control function is turned off, music playback can
continue without this unit switching to standby, even if the TV is set to
standby while a music player or other device is connected and playing.
1
Press and hold MOVIE for 5 seconds or more.
0
The standby linking via HDMI control function switches on or off
and the status LED blinks as indicated below.
Standby linking
via HDMI control
function
On
(Default)
Off
Automatically turning on the power according
to the playback of the playback device (Auto
on control function)
If you turn on the auto on control function and playback is started by the playback
device while this unit is on standby, the power of this unit is automatically turned on
and playback is started. In addition, if the power is on, the input source is
automatically switched according to the playback of the playback device. The auto
on control function can be set to on or off for each input source.
1
Switch to the input source you want to set.
2
On the remote control unit, press the button that corresponds
to the input source you want to set for 5 seconds or longer.
Input source Button
TV (HDMI eARC/ARC) TV
OPTICAL IN OPT
AUX IN AUX
The status LEDs in the display of the current input source blink three times.
Auto on control
function
[Ex.] Input source:
TV (HDMI eARC/ARC)
On
(Default)
Off
Contents Connections Playback Settings Tips Appendix
29
To Next Page
Loading...
Need help?
General
