10
Control Commands
(Host → DN-700R)
CATEGORY CONTENTS CODE DESCRIPTION
Advanced
Recording
Options
Rename User Area @0Uaxxxx\r
Edits the user area character string to be
automatically included in recorded file names,
where xxxx stands for a user area name of up to
32 characters
See Appendix > Acceptable Characters for
Serial Communication for details on which
characters can be used in the user area’s new
name
Add/Remove User Area
in Recorded File Name
Format
@0USNN\r
Sets recorded file names to automatically
include or not include the user area name, where
NN (the setting) = 00 (include) or 01 (don’t
include)
Set Timer (by day of the
week)
@0ShDWXXxxx
xxxxHHMMhhm
mUUUUU\r
Sets DN-700R to automatically start recording at
a specific day and time:
• XX (the record timer setting number) = 01–30
• xxxxxxx (the day or days of the week) =
SMTWTFS and/or _; see note below for
details
• HHMM (the start time in hours and minutes) =
0000–2359
• hhmm (the duration of the recording in hours
and minutes) = 0000–2359
• UUUUU stands for a user area name of up to
32 characters
Note: For the xxxxxxx variable, an entry must be
made for all seven days of the week; if you
would like to skip a day of the week, enter _
instead of the first letter of the day name; for
example, to set the recording only on Monday,
Wednesday and Friday, enter _M_W_F_ for
xxxxxxx
Note: If you want to set the recording to start
every hour, enter ** for the HH variable
Set Timer (by specific
date and time)
@0ShDTXXYYM
MDDHHMMhh
mmUUUUU\r
Sets DN-700R to automatically start recording at
a specific date and time:
• XX (the record timer setting number) = 01–30
• YYMMDD (the year, month, and date to start
recording) = 130101–351231
• HHMM (the start time in hours and minutes) =
0000–2359
• hhmm (the duration of the recording in hours
and minutes) = 0000–2359
• UUUUU stands for a user area name of up to
32 characters
Note: To set the recording to occur annually,
enter ** for the YY variable; to set the recording
to occur monthly, enter ** for the MM variable
Timer Off @023TO\r Turns the record timer(s) off
Delete Timer Setting @0ShDLNN\r
Deletes the timer assigned to the timer setting
number, where NN (the timer setting number) =
01–30