PLAY Play Button Press to playback tape.
■
Stop Button Press to stop the tape in any mode.
<<
Fast Rewind Button Press for fast rewind.
>>
Fast Forward Button Press for fast forwarding.
REC/REC MUTE Rec/Rec Mute
Button
Press the REC/REC MUTE (•) button and PLAY button simultaneously to start
recording. If only the REC/REC MUTE (•)
button is pressed, the deck enters the
Recording Pause mode. Pressing this button in the Recording Pause mode will start
Auto Rec Mute, and a 5-second silent space is recorded onto the tape. See page 11.
REC PAUSE Rec Pause Button Press this button to enter the recording pause mode from the recording or recording
mute mode. This button can only be used during recording. See page 11.
◄►
Direction Button
Changes the tape transport direction from forward
"►" to reverse "◄", and vice versa.
Display
Indicators with an encircled number light up when the corresponding button is
pressed.
CASSETTE TAPES
• Handling Precautions
• C-120 Cassettes
C-120 cassette tapes are not recommended as they use a very thin tape base which
may become tangled around the capstan or pinch roller.
• Tape Slack Before putting a tape into the deck, take up any slack with a pencil or
your finger tip. This precaution prevents the tape from becoming entangled around
the capstan or pinch roller.
• Storage Precautions
• Do not store cassette tapes in a place where they will be subject to:
• Extremely high temperature or excessive moisture
• Excessive dust
• Direct sunlight
• Magnetic fields (near TV sets or speakers)
• To eliminate tape slack, store your cassettes in cassette cases with hub stops
• Accidental Erasure Prevention
• All cassettes have erasure prevention tabs for each side. To protect valuable
recordings from accidental or inadvertent erasure, remove the tab for the appropriate
side with a screwdriver or another tool.
• To record on a tape whose erasure prevention tabs have been removed, cover the
tab holes with adhesive tape.
ape Transport Buttons
7
To Next Page
Loading...
Need help?
General
