59
DN-HD2500
(5) Next mount SLIP MAT (B).
(6) Turn over, being careful that the piled slip mats do not fall, and set on the main unit.
Place the supplied jig (spacer : t0.5 ) between the JOG WHEEL SUB ASSY and the slip mat on the top (SLIP MAT (B)).
(7) Hold the JOG WHEEL SUB ASSY so that the jig does not move, then tighten the screw using a hexagonal wrench (2.6 x 3
BBS).
SLIP MAT (B) : Ref No. 60
(The slip mat has no specific front or rear side.)
spacer : t0.5
To Next Page
Loading...
