19
ENGLISH
(3) Detailed Description of Preset Functions
(* = initial setting)
01) “Preset Type (*)” (Three different sets (types) of presettings can be made and used for different purposes.)
*01:P No=1 : Set to preset type 1.
*01:P No=2 : Set to preset type 2.
*01:P No=3 : Set to preset type 3.
02) “Program 1 OFF (ON)” (CD)
*02:Prg 1 : Store the contents of program 1 when on. (Initial setting - OFF)
03) “Progam 2 OFF (ON)” (CD)
*03:Prg 2 : Store the contents of program 2 when on. (Initial setting - OFF)
04) “Program 3 OFF (ON)” (CD)
*04:Prg 3 : Store the contents of program 3 when on. (Initial setting - OFF)
05) “Power On (****)”
*05:P On=Stb : Standby mode is set at specified track after TOC is read.
*05:P On=Ply : Playback begins in the all repeat mode after TOC is read.
*05:P On=Stp : Stop mode is set after TOC is read.
06) “Time Mode” (CD)
*06:Time=ELA : Time display is elapsed time when power is turned on.
*06:Time=REM : Time display is remaining time when power is turned on.
07) “Random ON/OFF” (CD)
*07:Rand=OFF : Playback mode is normally when power is turned on.
*07:Rand=ON : Random playback mode is set when power is turned on.
08) “Finish Mode ” (CD)
*08:Fin=Stop : Stop mode is set after playback ends.
*08:Fin=Next : Standby mode is set at next track after playback ends.
*08:Fin=RCue : Standby mode is set at playback start position after playback ends.
09) “Next Standby” (CD)
*09:NStb=OFF : Return to the play start position and standby when the CUE button is pressed during
playback.
*09:NStb=ON : Standby at the beginning of the next track when the CUE button is pressed during
playback.
10) “Next Track Reserve” (CD)
*10:Rsv=OFF : Specified track is searched for immediately when select knob is turned during
playback.
*10:Rsv=ON : Track to be searched for is scheduled after playback of current track ends when select
knob is turned during playback.
11) “Play Lock” (CD)
*11:Lock=ON : Inhibit all operations other than the
13, TIME, CUE, 2, PITCH, +, – and TITLE
buttons during playback.
*11:Lock=OFF : Enable all functions during playback.
12) “Panel Lock ON/OFF” (CD)
*12:Pane=OFF : Enable operation of all the buttons on the front panel.
*12:Pane=ON : Inhibit operation of all panel buttons other than those use for presetting operations
and OPEN/CLOSE button.
13) “CueDet. Level” (CD)
*13:CDet=–** : Set the audio detection level for cueing. (*–48 / –42 / –36)
*13:CDet=OFF : Sound startup position is not cued.
14) “CD Pitch”
*14:Pit=Norm : Play at normal speed.
*14:Pit=+/–*.* : Play at variable speed.
±(0.2 / 0.4 / 0.6 / 0.8 / 1.0 / 1.2 / 1.4 / 1.6 / 1.8 / 2.0 / 2.2 / 2.4 / 2.6 / 2.8 / 3.0), 0Fix
15) “Text Display” (CD)
*15:Text=OFF : Display is set time mode when power is turned on.
*15:Text=ON : Display is set text mode when power is turned on.
16) “Frame Display” (CD)
*16:Frm=ON : Display the frames on the time display during playback.
*16:Frm=OFF : Do not display the frames on the time display during playback. (The frames are
displayed in the manual search, standby, pause and end monitor modes.)
17) “EOM Time” (CD)
*17:EOM=**s : Set the EOM time. (5 / *10 / 15 / 20 / 30 / 60)
*17:EOM=OFF : Do not use the EOM function.
18) “Sleep ON (OFF)” (CD)
*18:Sleep=** : Automatically turn the servo functions off if no button is operated for ** minutes in
the pause, standby or manual search mode. (1 / 2 / 5 / 10 / 15 / *30)
*18:Slp=OFF : Do not automatically turn the servo functions off.
19) “IR Code”
*19:RC=DENON : Receive denon codes.
*19:RC=RC5 : RC-5 codes can be received.
20) “IR Remote”
*20:IR=ON : Accept infrared remote control signals.
*20:IR=OFF : Do not accept infrared remote control signals.
21) “Serial Remote”
*21:RS=232C : Set the serial ports to RS232C.
*21:RS=422A : Set the serial ports to RS422A. (DN-T645 only)
*21:RS=OFF : Inhibit signals of 9P D-Sub connector.
22) “Parallel Remote” (DN-T645 only)
*22:Para=ON : Enable input of control signals to the parallel remote connector.
*22:Para=OFF : Inhibit input of control signals to the parallel remote connector.
23) “Fader Start” (CD) (DN-T645 only)
*23:F=Pause : Start playback when remote fader pins (9-10) are short-circuited and pause when pins
are open.
*23:F=Play : Start playback when remote fader pins (9-10) are short-circuited and continue
playback when pins are open.
24) “Loop Cycles”
*24:Loop=** : Set the number of cycles for the relay and reverse mode. (1 / *5 / 10)
25) “Preset Clear (Ini. Preset)”
*25:P = Init? : Clear the presettings (set to the initial factory values).
26) “Ver = xxxx” : Display the microprocessor version. (“xxxx” is a number.)
27) “Play List” (DN-T645 only)
*27:PLst=OFF : Play List does not perform.
*27:PList=ON : MP3 is performed according to Play List.
To Next Page
