12
ENGLISH
2 Connecting an optical fiber cable to the digital audio input connector (OPTICAL)
Line up in proper direction
Remove the dust cap, line up the cable in the proper directly, then insert it securely as far as it goes.
NOTE:
• Harsh noise that could harm your ears or damage the speakers is generated when a DVD recorded in DTS is played while using
a decoder, etc., that is not DTS-compatible.
(3) Connecting to a AV amplifier with a Built-in decoder
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD player’s digital
audio output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound with the power and sense of presence
of a movie theater or concert hall.
DN-V200/DN-V300
Digital audio input
connector (OPTICAL)
Front speaker
(left)
Surround speaker
(left)
Center speaker
AV amplifier with a built-in decoder
(AV control center)
Front speaker
(right)
Subwoofer
Surround speaker
(right)
To power outlet
Optical fiber cable
To Next Page
Loading...
Need help?
General
