Denon DNP-730AE - Remote Control Unit

.
RL
AUDIO
OUT
OUT
DIGITAL AUDIO
OPTICAL
WPS
IR
NETWORK
AC IN
WI-FI
CONNECT
OUT
IR
CONTROL
iOS
WI-FI
CONNECT
TO DENON
DCD OR PMA
qwertyuiq
A
Rod antennas for wireless LAN
Stand this antenna upright when connecting to a network via wireless
LAN. (v p. 22)
.
90°
320°
320°
90°
The antenna clip can be removed from the rear panel.
A
Rotate the antenna clip 90 degrees to the left.
B
Pull the antenna clip out towards yourself.
0
The antenna clip is needed when transporting this unit. Keep it in a safe
place.
0
Attach the antenna clip by following the steps for removing it in reverse.
B
AUDIO OUT connectors
Used to connect devices equipped with analog audio inputs connectors
or an external pre-main amplifier. (v p. 17)
C
DIGITAL AUDIO OUT connector
Used to connect an AV receiver or D/A converter equipped with digital
audio input connectors. (v p. 18)
D
Wi-Fi Connect Button (Wi-Fi CONNECT WPS)
Connects to a wireless LAN.
(See the separate “Quick Start Guide”.)
E
IR CONTROL OUT connector
Connects to a Denon amplifier or CD player that is equipped with a
REMOTE CONTROL jack. (v
p. 24)
F
NETWORK connector
Used to connect this unit to the network. (v p. 21)
G
Wi-Fi Connect Button (Wi-Fi CONNECT iOS)
Connects to iOS.
(See the separate “Quick Start Guide”.)
H
AC inlet (AC IN)
Used to connect the supplied power cord. (v p. 25)
Contents
Connections Playback Settings Tips Appendix
11
Front panel Rear panel Remote control unit Index