Sleep timer function
You can have the power automatically switched to standby once a set time
has elapsed. This is convenient for listening while going to sleep.
1
Press SLEEP during playback and select the setting
time.
0
The o indicator on the display lights.
0
You can set the sleep timer in the range from 10 to 90 minutes in
steps of 10 minutes.
o
To cancel the sleep timer
Press SLEEP to set “Sleep 1Off”.
The o indicator on the display turns off.
0
The sleep timer setting is canceled when the unit switches to standby mode.
0
To check the time remaining until the sleep timer is activated, press SLEEP.
Switching the display’s brightness
1
Press DIMMER.
0
The brightness of the display switches each time the button is
pressed (4 levels).
If the buttons are operated when the display is turned off, information is displayed
temporarily at a low brightness level.
Contents Connections Playback
Settings
Tips Appendix
58
Front panel Rear panel
Remote control unit
Index
To Next Page
Loading...
