Denon DNP-730AE - Page 69

Friendly Name
The Friendly Name is the name of this unit displayed on the network. You
can change the Friendly Name according to your preferences.
o
Friendly Name
When you press ENTER, you can change the Friendly Name
according to your preferences.
0
Up to 63 characters can be input.
0
For character input, see “Inputting characters” (v
p. 62).
0
The default Friendly Name on first use is “Denon DNP-730AE”.
o
Default
Restores Friendly Name, which you had changed, to the default
setting.
Settings
You can make detailed settings for the network.
To change the network environment, perform “Quick Setup”. (For details
on the operations, see the separate “Quick Start Guide”.)
0
If you are using a broadband router (DHCP function), there is no need to
make the settings at “IP Address” and “Proxy”, since the DHCP function
is set to “On” in this unit’s default settings.
0
Only set “Settings” when connecting to a network without a DHCP
function.
o
When making wired connection
n
DHCP
Selects how to connect to the network.
On (Default):
Configure the network settings automatically from your
router.
Off: Configure the network settings manually.
Contents Connections Playback Settings Tips Appendix
69
Front panel Rear panel Remote control unit Index