Denon DNS1200 - USB DJ CD Player - Built-in Effector Controls; Echo;Loop Effect Settings; Flanger Effect Settings


Getting Started Connections Playback SpecificationsMemo Function Utility
Effector
One of the three types can be selected.
Echo/loop Parameter Setting
1
Turning echo/loop on.
q
Press the ECHO/LOOP button.
The PARAMETERS knob lights and the parameters
setting screen is displayed.
b When echo/loop indicator is solid (not blinking), press the ECHO/
LOOP button to set the parameter selection mode again.
2
Setting the echo/loop parameters.
w Turn either the
PARAMETERS
knob or the Scratch disc to set
the echo/loop parameters.
The PARAMETERS knob flashes.
b The echo feedback level can be set with the
scratch disc, the echo delay time with the
PARAMETERS knob.
3
Performing echo/loop playback.
When the feedback level is set to the maximum, echo/loop
playback begins with the specified delay time.
b During echo/loop playback, it is possible to search for tracks and
switch between the file play mode and playlist play mode.
Loop fade-out:
In the parameter selection mode, when the back cue or next
track mode is turned on during echo/loop playback, the parameter
selection mode is turned off.
When a new track is selected and playback is started, echo/loop
playback fades out and stops. This makes for a smooth transition
between echo/loop playback and normal playback.
4
e Press the
PARAMETERS
knob
or the
JOG MODE
button to
turn off the parameters setting
screen.
5
r Press the
ECHO/LOOP
button while the
flanger parameters setting screen is
displayed.
Turning echo/loop off.
Flanger Parameter Setting
1
t
Press the FLANGER button.
When the FLANGER button is pressed, the FLANGER
button lights and the parameters setting screen is
displayed.
b When the flanger indicator is solid (not blinking), press the
FLANGER button to set the flanger parameter selection mode
again.
2
y Turn either the
PARAMETERS
knob or the Scratch disc to set
the flanger parameters.
The FLANGER button and PARAMETERS
button flash while the parameters are
being set.
b The FLANGER Depth can be set with the Scratch
disc, while the FLANGER Delay Time can be set
with the PARAMETERS knob.
3
u Press the
PARAMETERS
knob or the
JOG MODE
button to turn off the
parameters setting screen.
4
i Press the
FLANGER
button while the
flanger parameters setting screen is
displayed.
Turning the flanger off.
Basic Operations
w
,
y
,
Q0
Q3
,
Q5
e
,
u
,
Q1
w
,
e
,
y
,
u
,
Q00
,
Q1
,
Q4
o
,
Q2
q
,
r
t
,
i