Denon DNS1200 - USB DJ CD Player - Data Management and Initialization; Memo Data Export Procedure; Unit Initialization and USB Formatting


Getting Started Connections Playback Specifications
Basic Operations Memo Function
1
At the top menu in the Memo, turn the PARAMETERS
knob or Scratch disc select “MEMO Export”.
When there is no preset data
on the external USB memory
device:
The export operation is performed.
When there is preset data on the external
USB memory device:
Step 2.
2
Select the setting item.
When “OK” is selected:
The export operation is performed.
The progress bar is displayed so you can check the progress.
When it is completed, the screen in step 1 reappears.
When “Cancel” is selected:
The screen in step 1 reappears.
Memo Export (Exporting Memo Data)
Initialize
This utility can be used to format the external USB memory
device connected to the DN-S1200. It can also be used
to restore the presettings and memo data to the factory
defaults.
1
At the top menu in the Utility mode, turn the
PARAMETERS knob or Scratch disc and select
“Initialize”.
2
Press the PARAMETERS button again to enter.
The “Initialize” list is displayed.
Initialize Mode
1
At the top menu in the Initialization, turn the
PARAMETERS knob or Scratch disc and select “USB
Format”.
b The DN-S1200 is set to the Format
mode.
2
Press the PARAMETERS button again to enter.
A confirmation message appears on the screen.
When “OK” is selected:
Formatting starts.
When formatting starts, a progress bar is displayed,
allowing you to follow the progress.
When “Cancel” is selected:
The screen in step 1 reappears.
USB Format (Formatting External USB
Memory Devices)
NOTE
• When this operation is performed, all the data on the DN-S1200 is
deleted.
• Items and data that can be preset.
1
At the top menu in the Initialization, turn the
PARAMETERS knob or Scratch disc and select “S1200
Init.”.
b The unit is set to the factory default
mode.
2
Press the PARAMETERS button again to enter.
A confirmation message appears on the screen.
When “OK” is selected:
Factory Default.
When “Cancel” is selected:
The screen in step 1 reappears.
S1200 Init.
NOTE
• When this operation is performed, all the data on the DN-S1200 is
deleted.
• Be very careful before performing this operation.
Utility