Denon DNS1200 - USB DJ CD Player - Database and Preset Data Management; Creating Full and Temporary Databases; Preset Data Export and Import; Memo Data Operations


Getting Started Connections Playback SpecificationsBasic Operations Memo Function
Preset Data
Use this procedure to save the presettings along with the
data on a device and to read out the presettings.
1
At the top menu in the Utility mode, turn the
PARAMETERS knob or Scratch disc and select “Preset
Data”.
2
Press the PARAMETERS button again to enter.
The “Preset Data” list is displayed.
Preset Data mode
1
At the top menu in the Preset Data, turn the
PARAMETERS knob or Scratch disc select “Import”.
A message for confirming that you
want to overwrite the internal data
is displayed.
b The unit is set to the import mode.
2
Select the setting item.
When “OK” is selected:
The import operation is performed.
When it is completed, the screen in step 1 reappears.
When “Cancel” is selected:
The screen in step 1 reappears.
Preset Import (Importing Preset Data)
1
At the top menu in the Preset Data, turn the
PARAMETERS knob or Scratch disc select “Export”.
When there is no preset data
on the external USB memory
device:
The export operation is performed.
When there is preset data on the external
USB memory device:
Step 2.
2
Select the setting item.
When “OK” is selected:
The export operation is performed.
The progress bar is displayed so you can check the progress.
When it is completed, the screen in step 1 reappears.
When “Cancel” is selected:
The screen in step 1 reappears.
Preset Export
Memo Data
This function allows you to store CD memo data onto and
import the data from a device.
It can also be used to delete the internal CD memo data.
1
At the top menu in the Utility mode, turn the
PARAMETERS knob or Scratch disc and select
“MEMO Data”.
2
Press the PARAMETERS button again to enter.
The “MEMO Data” list is displayed.
Memo Data mode
1
While the top menu in the memo mode is displayed,
turn either the PARAMETERS knob or the Scratch
disc to select “MEMO Import”.
A message for confirming that you
want to overwrite the internal data
is displayed.
b The DN-S1200 is set to the memo
import mode.
2
Select the setting item.
When “OK” is selected:
The import operation is performed.
When it is completed, the screen in step 1 reappears.
When “Cancel” is selected:
The screen in step 1 reappears.
Memo Import (Importing Memo Data)
Utility