Denon DRA-37 - Setting the Punch Through Function; Operating a Component Stored in the Preset Memory

Operating the remote control unit Operating the remote control unit
18
ENGLISH
Operating a component stored in the preset
memory
Operate the component.
For details, refer to the component’s operating instructions.
Some models cannot be operated with this remote control unit.
Set [MODE SELECTOR 1] to “A” or “B”.
Set to the A side for the CD/iPod, TV, DBS/CABLE or DVD
position, and to the B side for the CD-R/TAPE or VCR position.
1
3
Set [MODE SELECTOR 2] to the component you want
to operate.
2
ENGLISH
Setting the punch through function
Set [MODE SELECTOR 1] to “A”.
1
Press [A] and [D] at the same time.
• The indicator starts flashing.
3
Set [MODE SELECTOR 2] to the component to be
registered (TV or DBS/CABLE).
2
“Punch Through” is a function allowing you to operate 1, 2, 0, 3,
6, 7, 8 and 9 on CD, DVD/VDP, TAPE/CD-R/MD or VCR
components when in the TV or DBS/CABLE mode. By default, nothing
is set.
Input the number of the component you want to set.
4
No.
CD 1
DVD/VDP 2
TAPE/CD-R/MD 3
VCR 4
No setting 0