26
ENGLISH
• Audio section
(Power amplifier)
Rated output: 80 W + 80 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
Output terminals: A or B 14 to 16 Ω/ohms
A+B 18 to 16 Ω/ohms
(Analog)
LINE input — PRE OUT
Input sensitivity/input impedance: 200 mV / 47 kΩ/kohms
Frequency response: 10 Hz ~ 50 kHz: ±1.5 dB
S/N ratio: 100 dB (IHF-A weighted)
Total harmonic distortion: 0.009 % (-3 dB at rated output,8 Ω/ohms) (1 kHz)
Rated output: 1.2 V
PHONO input — REC OUT
Input sensitivity/input impedance: 2.5 mV/47 kΩ /kohms
RIAA deviation: ±0.5 dB (20 Hz ~ 20kHz)
S/N ratio: 74 dB (IHF-A weighted, with 5 mV input)
Total harmonic distortion: 0.03 % (1 kHz, 3V)
Rated output/Maximum output: 150 mV / 7 V
• Video section
(standard video jacks)
Input/output level and impedance: 1 V p-p, 75 Ω/ohms
Frequency response: 5 Hz ~ 10 MHz +1, -3 dB
• Tuner section
[FM] (note:
µ
V at 75
Ω
/ohms, 0 dBf = 1 x 10
-15
W) [AM]
Receiving range: 87.5 MHz ~ 107.9 MHz 520 kHz ~ 1710 kHz
Usable sensitivity: 1.4 µV (14.2 dBf) 18 µV
50 dB quieting sensitivity: MONO 2.8
µ
V (20.2 dBf)
STEREO 23
µ
V (38.5 dBf)
S/N ratio: MONO 80 dB (IHF-A weighted)
STEREO 75 dB (IHF-A weighted)
Total harmonic distortion: MONO 0.15 % (1kHz)
STEREO 0.3 % (1kHz)
• General
Power supply: AC 120 V, 60 Hz
Power consumption: 3.39 A
Maximum external dimensions: 434 (W) x 147 (H) x 417 (D) mm (17-1/16” x 5-25/32” x 16-7/16”)
Weight: 9.7 kg (21 lbs 6 oz)
• Remote control unit (RC-894)
Batteries: R03/AAA Type (two batteries)
External dimensions: 64 (W) x 206 (H) x 19 (D) mm (2-13/64” x 8-9/32” x 3/4”)
Weight: 140 g (Approx. 4.9 oz) (including batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
13
SPECIFICATIONS
To Next Page
Loading...
