Speakers
Make speaker-related settings.
Subwoofer
Select whether or not subwoofer is present, playback capacity for low
bass frequencies.
o
Subwoofer
Set the presence of a subwoofer.
Yes
(Default):
Use a subwoofer.
No:
Select when a subwoofer is not
connected.
o
Low Pass Filter
Set the low pass filter of the subwoofer channel.
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz /
200 Hz / 250 Hz (Default: 80 Hz)
0
This item cannot be set when “Subwoofer” is set to “No”.
Distances
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each
speaker.
o
Unit
Set the unit of distance.
Feet (Default)
Meters
o
Step
Set the minimum variable width of the distance.
1 ft / 0.1 ft (Default: 1 ft)
0.1 m / 0.01 m
Contents Connections Playback Settings Tips Appendix
128
Front panel Display Rear panel Remote Index
To Next Page
Loading...
