Denon DRA-800H - Adjust the Subwoofer Output (Subwoofer)

Adjust the subwoofer output
(Subwoofer)
Adjusts the subwoofer channel volume.
1
Press OPTION.
An option menu screen is displayed.
0
When the input source is “HEOS Music”, an option menu for
online music is displayed. Select “Receiver Options...”, then press
ENTER.
2
Use ui to select “Subwoofer”, then press ENTER.
The “Subwoofer” screen is displayed.
3
Use o p to turn subwoofer output on and off.
On
(Default):
The subwoofer is used.
Off: The subwoofer is not used.
4
Select “On” in step 3 and press i to adjust the
subwoofer channel volume.
-12.0 dB – +12.0 dB (Default : 0.0 dB)
0
“Subwoofer” setting is stored for each input source.
0
You cannot set this when “Subwoofer” - “Subwoofer” is set to “No”. (v p. 128)
0
You cannot set this when no audio signal is input or in the menu “HDMI Audio Out”
is set to “TV”. (v p. 116)
Contents
Connections Playback Settings Tips Appendix
86
Front panel Display Rear panel Remote Index