19
Network Control setting
Setting the Network Control to on enabled to control your
receiver using smartphone apps, home automation system,
Apple AirPlay or Amazon Alexa voice service.
Press SETUP on the remote control.
You can see the following on the display.
Audio
Use ui to select “Network”, then press ENTER.
1
2
Use ui to select “Network Control”, then press ENTER.
3
Press ENTER, then use o p to set the Network Control
setting, after that press ENTER again.
Select “NetCtrl” (Network Control) to “Off” to reduce the
power consumption during standby. You can not turn on
your receiver from your smartphone or use Bluetooth/
Apple AirPlay/HEOS app/Amazon Alexa until your receiver
is powered on manually and connects to your network.
Select “NetCtrl” (Network Control) to “Always” to control
your receiver from your smartphone, use Bluetooth/
Apple AirPlay/HEOS app/Amazon Alexa voice service and
maintain constant network access. Power consumption
during standby power will be slightly higher.
4
Press SETUP to exit the setup menu.
5
1. DRA-900HE2_QSG_ENG_00A_230622.indd 191. DRA-900HE2_QSG_ENG_00A_230622.indd 19 2023/07/05 15:04:502023/07/05 15:04:50
To Next Page
Loading...
