7
• In case the unit was already setup back in time the Setup
Assistant won't start automatically and you only see the
Denon logo on screen. In such case you can access the Setup
Assistant by pressing SETUP on the remote control and
selecting Setup Assistant from the menu.
Press X on the remote control.
Turn on the receiver
Verify that you can see this screen on your TV.
Please select a language...
Stereo Receiver Setup Assistant
[1/7]
Français
Deutsch
Italiano
Español
English
If this screen is not displayed, please go back and retry the
steps again in the recommended sequence.
Verify the connection
1. DRA-900HE2_QSG_ENG_00A_230622.indd 71. DRA-900HE2_QSG_ENG_00A_230622.indd 7 2023/07/05 15:04:482023/07/05 15:04:48
To Next Page
Loading...
