Playback the source in ZONE2
o
Playing the same source simultaneously in MAIN ZONE and ZONE2 (TV Audio Sharing setting)
By setting the ZONE2 input source to “Source” in the TV Audio sharing settings of this unit, you can play audio input from a TV via ARC or from a playback
device in the MAIN ZONE while enjoying the same content in ZONE2.
0
Only the controls on the main unit can be used to set “Source” as the input source.
ZONE2 SOURCE
ZONE2 ON/OFF
X
1
Select the input source to play back in the MAIN ZONE.
2
Press ZONE2 ON/OFF on the main unit to turn on the
power of ZONE2.
The ( indicator on the display lights.
Contents
Connections Playback Settings Tips Appendix
116
Front panel Display Rear panel Remote Index
To Next Page
Loading...
