Denon DRA-900H - Page 35

Connection 1 : TV equipped with an HDMI connector and compatible with the ARC
(Audio Return Channel)
Using a high quality HDMI cable
z
, connect one end to the HDMI port labeled “ARC” on your TV. Connect the other end to the HDMI OUT 1 port on this
unit.
When a TV with ARC support is connected, set “ARC” in the menu to “On”. (v p. 131)
z
For 4K TVs we recommend using an HDMI cable labeled “High Speed”
and “with Ethernet”.
z
For 8K TVs we recommend using an HDMI cable labeled “Ultra High
Speed”.
0
Only the PCM 2-channel setting can be used to play sound from a TV via
the ARC function. Set “PCM 2ch” as the audio format in the TV settings.
0
Set “4K/8K Signal Format” to “8K Enhanced” in the menu to enjoy 8K
video. (v p. 135)
(ARC)
IN
HDMI
TV
Contents
Connections Playback Settings Tips Appendix
35
Front panel Display Rear panel Remote Index