Denon DRA-900H - Page 95

Adjust the subwoofer output
(Subwoofer)
Adjusts the subwoofer channel volume.
1
Press OPTION.
An option menu screen is displayed.
0
When the input source is “HEOS Music”, an option menu for
online music is displayed. Select “Receiver Options...”, then press
ENTER.
2
Use cursor Up/Down to select “Subwoofer”, then press
ENTER.
The “Subwoofer” screen is displayed.
3
Use cursor Left/Right to turn subwoofer output on and
off.
On
(Default):
The subwoofer is used.
Off: The subwoofer is not used.
4
Select “On” in step 3 and press cursor Down to adjust
the subwoofer channel volume.
-12.0 dB – +12.0 dB (Default : 0.0 dB)
0
“Subwoofer” setting is stored for each input source.
0
You cannot set this when “Speaker Layout” - “Subwoofer” is set to “No”.
(v p. 142)
0
You cannot set this when no audio signal is input or in the menu “HDMI Audio Out”
is set to “TV”. (v p. 129)
Contents
Connections Playback Settings Tips Appendix
95
Front panel Display Rear panel Remote Index