Denon DRA-F109 Getting Started Guide

3
ENGliSh DEutSch FrANçAiS itAliANo ESpAñol NEDErlANDS SVENSKA
Setup Steps
1
Installing batteries in
the remote control unit
R03/AAA
batteries
There are six steps to the setup process.
1
Install batteries in the remote control unit
2
Connect the speakers
3
Connect the audio devices
4
Connect the power cable
5
Turn the power on
6
Begin playback

Denon DRA-F109 Specifications

General

Type	Direct drive audio turntable
Hi-Fi	Yes
Operation	Fully automatic
Product color	Black
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	65 W
USB ports quantity	-
Connectivity technology	Wired
FM antenna ports quantity	1
Display	LED
Number of tuners	1 tuner(s)
Receiver type	stereo
Output impedance	4 Ω
Audio output channels	2.1 channels
Total Harmonic Distortion (THD)	0.7 %
HDMI in	0
Digital audio coaxial in	2
Headphone connectivity	6.3 mm
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Ethernet LAN	No

Weight and Dimensions

Depth	250 mm
Width	283 mm
Height	82 mm
Weight	2600 g