To Next PageTo Next PageWhy are subtitles not showing on my Denon DVD Player?
If subtitles aren't showing up on your Denon DVD player, first ensure that the DVD actually contains subtitles. If it does, check the settings to make sure subtitles are turned on.
Why won't my Denon DVD-3800 DVD Player play or why does it stop immediately?
If your Denon DVD player isn't playing when you press the PLAY button, or if playback stops immediately, it could be due to a few reasons. First, ensure you are using a compatible disc such as a DVD, video CD, or music CD, as other disc types aren't supported. If the disc is dirty, wipe it clean. Also, condensation on the disc or player can cause issues; let the unit stand for 1 to 2 hours to allow it to dry.
What to do if there is no picture on my Denon DVD-3800 DVD Player?
If you're not getting a picture on your Denon DVD player, start by checking all the connections to ensure they are secure. Also, make sure that VIDEO OUT has not been set to OFF for PURE DIRECT MODE. Finally, confirm that your TV’s input is set to “video”.
How to troubleshoot sound issues with a Denon DVD-3800 DVD Player?
If you're not getting any sound or the sound quality from your Denon DVD player is poor, check the connections first. Ensure that the input settings on your TV or stereo are correctly configured. Lastly, verify the “DIGITAL OUT” and “COMPRESSION” settings.
How to fix a Denon DVD-3800 DVD Player when the power does not turn on?
If your Denon DVD Player doesn't turn on, ensure the power cord is securely plugged into the power outlet.
Why menu playback of video CD’s is not possible on Denon DVD-3800 DVD Player?
Menu playback is not possible with anything but video CDs with playback control on Denon DVD Player.
Why menu screen messages for the desired language do not display on Denon DVD-3800 DVD Player?
If the menu screen messages for the desired language do not display on your Denon DVD Player, check the default setting for the disc language’s menu language.
Why is the disc not played with the audio or subtitle language set as the default setting on my Denon DVD-3800?
The disc might not play with the selected audio or subtitle language on your Denon DVD Player if that audio or subtitle language is not included on that DVD.
Why is picture not displayed in 4:3 (or 16:9) on my Denon DVD Player?
If the picture is not displayed correctly in 4:3 (or 16:9) on your Denon DVD Player, set the 'TV ASPECT' default setting to the proper setting for the connected TV.
How to reset forgotten rating password on Denon DVD-3800?
To reset a forgotten password for the rating level on your Denon DVD Player, reset all the settings to Factory Preset.
General| Brand | Denon |
|---|---|
| Model | DVD-3800 |
| Category | DVD Player |
| Language | English |
Check for leakage current or line to chassis resistance before returning unit.
Procedure to check disc read, laser current (Iop), and Traverse Unit replacement.
Method for measuring laser drive current (Iop) for DVD and CD.
Precautions for handling the laser pick-up to prevent damage to the laser diode.
Steps for preparing the unit before replacing the Traverse Unit.
Procedure for removing and mounting the Traverse Unit.
Procedure for setting the unit to aging mode for testing.
Procedure to restore factory settings and initialize the DVD player.
Steps to diagnose and resolve 'No power' issue related to FL tube.
Steps to diagnose and resolve 'No power' issue with FL tube and LEDs.
Waveform examples for the main P.W.B. under different operating modes.
Waveform examples for the audio P.W.B. under various test points.
Waveform examples for the video P.W.B. under various test points.
