E
ericakhanAug 28, 2025
What to do if playback does not start when the title is selected on Denon DVD Player?
- CCaitlin SchneiderAug 28, 2025
If playback doesn't start when you select a title on your Denon DVD Player, check the 'RATINGS' setting.
To Next PageTo Next PageWhat to do if playback does not start when the title is selected on Denon DVD Player?
If playback doesn't start when you select a title on your Denon DVD Player, check the 'RATINGS' setting.
How to fix Denon DVD Player if power does not turn on?
If your Denon DVD Player isn't turning on, plug the power cord securely into the power outlet.
What to do if playback does not start when PLAY button is pressed on Denon DVD-3800?
If playback doesn't start on your Denon DVD Player, or it stops immediately, condensation may be on the disc or player; let it stand for 1 or 2 hours. Ensure you are using a compatible disc (DVDs, video CDs, and music CDs). Wipe off the disc if it is dirty.
What to do if my Denon DVD-3800 DVD Player sound is not produced or sound quality is poor?
If the sound from your Denon DVD Player is not working or the sound quality is poor, check the connections, properly set the input of the TV or stereo, and check the 'DIGITAL OUT' and 'COMPRESSION' settings.
What to do if my Denon DVD-3800 DVD Player picture does not appear?
If the picture doesn't appear on your Denon DVD Player, check the connections and make sure the TV’s input is set to 'video'. Also, verify that VIDEO OUT has not been set to OFF for PURE DIRECT MODE.
Why does my Denon DVD-3800 remote control not work?
If your Denon DVD Player remote control isn't working, make sure the batteries are correctly inserted, replacing them if necessary. Ensure you're pointing the remote at the sensor within a 7-meter range, and that there are no obstacles blocking the signal.
General| Brand | Denon |
|---|---|
| Model | DVD-3800 |
| Category | DVD Player |
| Language | English |
Check for leakage current or line to chassis resistance before returning unit.
Procedure to check disc read, laser current (Iop), and Traverse Unit replacement.
Method for measuring laser drive current (Iop) for DVD and CD.
Precautions for handling the laser pick-up to prevent damage to the laser diode.
Steps for preparing the unit before replacing the Traverse Unit.
Procedure for removing and mounting the Traverse Unit.
Procedure for setting the unit to aging mode for testing.
Procedure to restore factory settings and initialize the DVD player.
Steps to diagnose and resolve 'No power' issue related to FL tube.
Steps to diagnose and resolve 'No power' issue with FL tube and LEDs.
Waveform examples for the main P.W.B. under different operating modes.
Waveform examples for the audio P.W.B. under various test points.
Waveform examples for the video P.W.B. under various test points.
