Denon HEOS Link HS2 - Firmware Upgrade

o
Firmware upgrade
1
Select “Advanced”.
2
Select “FIRMWARE UPDATE” tab.
n
Update status
Manually check for a firmware upgrade.
n
Allow updates
ON
(Default):
Allows updates
OFF: Does not allow updates
3
Select “Save Settings” to apply the new settings or
“Cancel Changes” to revert to the previous settings.
o
About
Viewing technical details about the HEOS device.
1
Select “Advanced”.
2
Select “ABOUT” tab.
3
Scroll down to see information about the device’s
a. Hardware
b. Software
c. Device
Contents Setup Use Troubleshooting Status LED Appendix
41