Denon HEOS Link HS2 - Power management; Power modes

Power management
Power modes
o
Quick Start Mode
HEOS device automatically enters "Quick Start Mode" to save power
in the following cases. This unit will automatically resume to full power
whenever the device is selected and playing music.
The status LED dims when the mode is switched to Quick Start Mode.
n
Ethernet
After around 20 minutes of no operation and no network access after
playing music via Ethernet.
n
Wi-Fi
After around 20 minutes of no operation and no network access after
playing music via Wi-Fi.
n
USB
After around 20 minutes of no operation and no network access after
playing music from a USB memory device.
n
Bluetooth
After the Bluetooth connection is disconnected and there is around 20
minutes of no operation and no network access after playing music via
Bluetooth.
n
AUX IN
After around 20 minutes of no operation after AUX cable is
disconnected.
n
OPT IN
After around 20 minutes of no operation after optical device playback
is stopped in the HEOS app.
Contents Setup Use Troubleshooting Status LED Appendix
48