I can't control an external device via IR and Trigger
Solution Refer to Page
0
Check the control cable connection between HEOS Link and the AV receiver or amplifier. 42
I don't hear anything from the HEOS Link
Solution Refer to Page
0
Check the connection between HEOS Link and the AV receiver or amplifier. 14
0
Check that the correct input source is being used for the AV receiver or amplifier. –
0
Check that HEOS Link and the AV receiver or amplifier are at a suitable volume. –
0
Check that the external device connected to HEOS Link is connected and playing correctly. 15
Contents Setup Use Troubleshooting Status LED Appendix
52
To Next Page
Loading...
