How to troubleshoot a Denon PMA-2000AE that won't turn on?
If your Denon Amplifier's power indicator doesn't light up and no sound is produced when you turn it on, the power supply cord might not be connected. Check that the cord is properly plugged in.
What to do if the Denon PMA-2000AE Amplifier remote control is not working?
If your Denon Amplifier's remote control isn't working, there could be several reasons: * The batteries might be dead. Try replacing them with new ones. * You might be too far away. Move closer to the unit. * There could be something blocking the signal. Make sure there's nothing between the remote and the amplifier. * Ensure you're pressing the correct button. * Also, check that the batteries are inserted correctly, with the positive and negative ends in the right direction.
Why is there no sound from my Denon PMA-2000AE Amplifier but the power light is on?
If you're not getting any sound from your Denon Amplifier, even though the power light is on, consider these possibilities: * Ensure the speaker cords are securely connected. * Verify that the INPUT SELECTOR knob or P. DIRECT switch is in the correct position. * Check that the VOLUME control knob isn't turned all the way down; adjust it to a suitable level.
Why is my Denon PMA-2000AE producing a booming sound when playing records?
If you're playing records and hearing a booming sound with your Denon Amplifier, here's what you can check: * Make sure the turntable's ground wire is securely connected. * Ensure the input cords are properly connected to the PHONO terminals. * Consider if a nearby TV or VCR is causing interference; if so, try repositioning the turntable.
What causes distorted sound on my Denon PMA-2000AE Amplifier?
If you're experiencing distorted sound with your Denon Amplifier, it could be due to a few reasons: * The stylus pressure might be too light; try applying the proper pressure. * There could be dirt on the stylus tip; inspect and clean it if necessary. * The cartridge might be defective; consider replacing it.
How to fix sound only coming from one side on my Denon PMA-2000AE?
If the sound is only coming from one side on your Denon Amplifier, check the following: * Ensure that the speaker cords are securely connected. * Verify that the input cords are also properly connected. * Adjust the BALANCE control knob to correct any imbalance.
Why is my Denon PMA-2000AE howling when playing records at high volume?
If you are playing records and the volume is turned up and you hear howling from your Denon Amplifier, the issue may be: * The turntable and speaker systems are too close. Move speaker systems as far away as possible. * The floor is soft and vibrates easily. Use cushions to absorb the vibrations transmitted from the floor to the speakers. If the turntable does not include insulators, use audio insulators, available in stores.
What to do if my Denon PMA-2000AE Amplifier power indicator doesn't light up?
If the power indicator isn't lighting up and no sound is coming from your Denon Amplifier when you turn it on, the most likely cause is that the power supply cord isn't connected. Make sure it's properly plugged in.
Why are the stereo positions inverted on my Denon PMA-2000AE Amplifier?
If the positions of instruments sound inverted for stereo sources on your Denon Amplifier, the left and right speakers or input cords might be inverted. Double-check the left/right connections to ensure they are correct.
Why is the volume different between tuner and records on my Denon Amplifier?
If you notice that the volume level differs between your tuner and records on your Denon Amplifier, it's likely because the tuner or record output levels are different. If your tuner has an output control, adjust it to match the turntable's output.
To Next Page
General
