Denon PMA-2020AE - Setup Steps; Remote Control Unit

2
ENGliShDEutSchFrANçAiSitAliANoESpAñolNEDErlANDSSVENSKA
Setup Steps
There are six steps to the setup process.
1
Install batteries in the remote control unit
2
Connect the speakers to the amplifier
3
Connect the CD player to the amplifier
4
Plug the power cord into a power outlet
5
Turn the amplifier’s power on
6
Begin playback
1
Install batteries in the
remote control unit
R03/AAA
batteries