Denon PMA-30 - Page 33

0
When “Denon PMA-30” is not displayed in the screen on the Bluetooth
device, search for devices on the Bluetooth device.
0
When you are prompted for a pass key in the screen on the Bluetooth
device, enter “0000”.
0
English letters, numbers and certain symbols are displayed. Incompatible
characters are displayed as “.” (period).
5
Play back music on the Bluetooth device.
The speakers output music that the Bluetooth device is playing
back.
0
Adjust to the appropriate volume level.
0
When the pairing fails, retry from step 3.
0
To perform pairing for another Bluetooth device, repeat steps 2 to 5 for each
device you want to perform pairing for.
0
When no Bluetooth device is connected, “No Connection” appears on the display.
NOTE
0
The pairing mode on this unit lasts for approx. 5 minutes. When the pairing mode
on this unit is canceled before the pairing is completed, retry from step 3.
0
This unit cannot perform pairing against a Bluetooth device with a pass key other
than “0000”.
Contents
Connections Playback Settings Tips Appendix
33
Front panel Display Rear panel Remote Index