5
Getting Started Operation Troubleshooting Specications Index
ENGLISH
NOTE
Connections for all compatible audio signal format is described in
this operating instructions. Please select the type of connections
corresponding to the equipment you are connecting.
Connections
Connecting Cables
Preparations
Audio cables
Analog connections (stereo)
R
L
R
L
Speaker connections
Connecting the Audio Equipment
1
Peel off about 10 mm of sheathing
from the tip of the speaker cable, then
either twist the core wire tightly or
apply solder to it.
2
Turn the speaker terminal
counterclockwise to loosen it.
3
Insert the speaker cable’s core wire to
all the way into the speaker terminal.
4
Turn the speaker terminal clockwise
to tighten it.
NOTE
v
Protection circuit
Connecting the Speaker Cables
Connecting the Speakers
n Speaker impedance
Speakers used Impedance
Cautions on playing SA sources:
Connections
Speaker terminal dimensions
8mm
5mm
1.PMAA100E3_ENG_003_0826.indd 5 2010/08/31 9:15:38
To Next Page
Loading...
Need help?
General
