Denon PMA-A110 User Manual

Switching the display’s brightness
The display brightness can be adjusted between four levels. Switching the
display off reduces a source of noise that affects sound quality, enabling
higher sound quality playback.
1
Press DIMMER.
0
The brightness of the display switches each time the button is
pressed.
0
The display brightness is set to most brightly by default.
0
The DIMMER button also controls the Denon's Super Audio CD Player DCD-A110,
so the DCD-A110 can be operated simultaneously with this unit. When the two
units have different settings, press and hold in the button for lease 2 seconds to
reset them both to the default setting, then make the desired setting.
Contents Connections Playback Settings Tips Appendix
26
Front panel Rear panel
Remote control
unit
Index

Denon PMA-A110 Specifications

General

Input Sensitivity MM	2.5 mV / 47 kOhm
Treble Control	±8 dB at 10 kHz
Bass Control	±8 dB at 100 Hz
Standby Consumption	0.2 W
Dimensions	434 x 182 x 450 mm
Total Harmonic Distortion	0.007%
Frequency Response	5 Hz - 100 kHz
Input Sensitivity MC	200 µV / 100 ohm
Power Output (8 Ohm)	80 W (20 Hz - 20 kHz, THD 0.07%)