Denon PRIME 2 - FX Parameters; Core FX Types

30
FX Parameters
Echo Parameter
V
alue Range
This effect adds echoes of the original signal. Beats 1/64, 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1,
2, 4, 8, 16, 32
Feedback 0
–
100
Wet/Dry 0
–
100
Delay Parameter
V
alue Range
This effect adds repeated instances of the original signal
that decay over time.
Beats 1/64, 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1,
2, 4, 8, 16, 32
Wet/Dry 0
–
100
Hall Parameter
V
alue Range
This effect adds reverberated echoes of the original signal. Beats 1
/
64, 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1,
2, 4, 8, 16, 32
Decay 0
–
100
Wet/Dry 0
–
100
Ping Pong Parameter
V
alue Range
This is a stereo delay effect where the rate of delay is
different between the left and right channels.
Beats 1/64, 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1,
2, 4, 8, 16, 32
Pan 0
–
100
Wet/Dry 0
–
100
A
uto Gate Parameter
V
alue Range
This effect applies level reduction to the original signal at a
regular rate.
Beats 1/64, 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1,
2, 4, 8, 16, 32
Wet/Dry 0
–
100
Flanger Parameter
V
alue Range
This effect adds a slightly delayed copy of the original signal
to create a comb-filter effect (often referred to as resembling
a jet plane engine).
Beats 1/64, 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1,
2, 4, 8, 16, 32
Wet/Dry 0
–
100
LFO Filter Parameter
V
alue Range
This effect varies the cutoff frequency at a regular rate. Beats 1/64, 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1,
2, 4, 8, 16, 32
Resonance
0–100
Wet/Dry 0
–
100