10
/36Updated: Dec. 23, 2020
CAUTION
foreign materials or damaged pins on each connector of this product before connecting to
the diagnosis connector of the vehicle side.
They may cause damage to the diagnosis connector on the vehicle side and the product’s connector terminal.
When disconnecting this product from the diagnosis connector on the vehicle side, ensure that the
connector lock is released.
Failure to release the connector lock may damage the vehicle diagnosis connector and the product’s connector
terminal.
Do not pull the
USB cable lock portion when disconnecting this product from the diagnosis connector
on the vehicle side when using the USB cable lock.
The lock is designed to come off if certain force is applied. If the lock is pulled off by pulling the lock portion, your
hand may hit something and may cause injury
When connecting this product to the vehicle side diagnosis connector or disconnecting it from the
connector, ensure the correct orientation and inclination of the connector and gently
keeping correct angle for pins and connector.
If you attempt to connect this product with a wrong orientation, if the product is connected with an inclination, or if the
product is disconnected with an inclination, the connector terminals of the vehicle
or the product can be damaged.
Do not leave this product connected to the vehicle when not in use for diagnosis.
Connecting this product to the diagnosis connector on the vehicle side turns ON this product even if the starter
switch (ignition switch) is OFF. Leaving this product connected may results in flat battery of the vehicle.
Do not drive the vehicle while this product
is connected to the vehicle.
while this product is connected to the diagnosis connector on the vehicle side, may cause difficulty for proper
3. Safety precautions
3. Safety
precautions
●
●
●
●
To Next Page
Loading...
