Denver Instrument P-2002 - Specifications

Specifications
Precision Analytical Balances
Models P-114* P-214* P-314*
Capacity 110 g 210 g 310 g
Readability 0.1 mg 0.1 mg 0.1 mg
Taring Range 0 to 110 g 0 to 210 g 0 to 310 g
Repeatability, (s) 0.1 mg 0.1 mg 0.1 mg
Linearity 0.2 mg 0.2 mg 0.2 mg
Stabilization Time 3 seconds 3 seconds 3 seconds
Pan Size 3.1" dia. 3.1" dia. 3.1" dia.
(79mm) (79mm) (79mm)
Precision Toploading Balances
Models P-203* P-403* P-603D* P-402* P-602* P-2002*
Capacity 200 g 400 g 100/600 g 400 g 600 g 2000g
Readability 0.001 g 0.001 g 0.001/0.01g 0.01g 0.01g 0.01 g
Taring Range 0 to 200 g 0 to 400 g 0 to 100/600 g 0 to 400 g 0 to 600 g 0 to 2000g
Repeatability, (s) 0.001 g 0.001 g 0.002/0.01 g 0.01 g 0.01 g 0.01 g
Linearity 0.002 g 0.002 g 0.003/0.02 g 0.02 g 0.02 g 0.02 g
Stabilization Time 3 seconds 3 seconds 4 seconds 3 seconds 3 seconds 3 seconds
Pan Size 4.5 " dia. 4.5 " dia. 4.5 " dia. 4.5 " dia. 4.5 " dia. 7.0 x 7.0"
(114mm) (114mm) (114mm) (114mm) (114mm) (178 x 178mm)
Models P-4002* P-4002D* P-8002D P-6001* P-8001
Capacity 4000 g 400/4000 g 800/8000 g 6000 g 8000 g
Readability 0.01 g 0.01/0.1 g 0.01/0.1 g 0.1 g 0.1 g
Taring Range 0 to 4000 g 0 to 400/4000 g 0 to 800/8000 g 0 to 6000 g 0 to 8000 g
Repeatability, (s) 0.01 g 0.02/0.1 g 0.02/0.1 g 0.1 g 0.1 g
Linearity 0.02 g 0.03/0.2 g 0.03/0.2 g 0.1 g 0.1 g
Stabilization Time 3 seconds 4 seconds 4 seconds 3 seconds 3 seconds
Pan Size 7.0 x 7.0" 7.0 x 7.0" 7.0 x 7.0" 7.0 x 7.0" 7.0 x 7.0"
(178 x 178mm) (178 x 178mm) (178 x 178mm) (178 x 178mm) (178 x 178mm)
Common Specifications *PI models with internal calibration
Dimensions (LxWxH) Analyticals: 14.6 x 9.4 x 13.3" (371 x 239 x 338mm)
Dimensions (LxWxH) Toploaders: 14.6 x 9.4 x 3.8" (371 x 239 x 97mm)
Weighing Chamber Dimensions: 8.3 x 8.0 x 9.8” (211 x 203 x 249mm)
Operating Temperature: 10° - 30°C (50° - 86°F)
Storage Temperature: -10° - 30°C (14° - 86°F)
Humidity: < 90% RH
Net Weight (Analyticals): 15 lbs (6.80kg)
Net Weight (Toploaders): 10 lbs (4.54kg)
Electrical Requirements: AC: 115V 50/60Hz, other voltages available.
DC: +5V 2.5A
+15V 0.5A
-15V 0.3A
CAUTION!
Use AC adaptor supplied with unit only!
Contact Denver Instrument for replacement.
ii
!