Denver Instrument P-2002 - Analytical Balances and Draft Shield; Draft Shield Assembly

Analytical Balances and Draft Shield
To attach draft shield, place it upon the balance so the grooves line
up when the draft shield is approximately at a 30° angle. Pull the
pin at the rear of the draft shield and turn clockwise until it is in
line with the balance. Release the pin. Place the components listed
below inside the chamber in the order given:
• Stainless steel platform
• Spill Ring
• Weighing Pan
3
User: J. Smith
g
Weigh
P
-1
1
4
M
a
x
1
2
0
g
d
=
0
.1
m
g
1
1
-0
3
-0
1
1
2
:0
0
:0
0
3
.5
2
7
8
1
o
z
100.0127
TARE
Stainless steel
platform
Place the draft
shield on the
balance so the
grooves line up
approximately
at a 30° angle
Spill ring
Weighing pan